BKHQB - C-16081 DARK GRAY GLOSS ALKYD ENAMEL
- MSDS: BKHQB
- Manufacturer: EVERSEAL MFG CO INC
- Product Name: C-16081 DARK GRAY GLOSS ALKYD ENAMEL
- National Stock Number: 8010-00-616-7496
Product Identification
Product ID:C-16081 DARK GRAY GLOSS ALKYD ENAMEL
MSDS Date:09/03/1988
FSC:8010
NIIN:00-616-7496
MSDS Number: BKHQB
Responsible Party
RIDGEFIELD, NJ 07657-2329
US
Emergency Phone: 201-943-4986
Info Phone: 201-943-4986 / FAX 201-943-1123
Preparer: FRANK PRIMERANO
Cage: 72988
Contractor
Telephone: 201-943-4986
Cage: 72988
Ingredients
RESIN
Fraction By Weight: 35%
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 13%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 2%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 5%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
ADDITIVES
Fraction By Weight: 2%
MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES
CAS: 64742-88-7
Fraction By Weight: 43%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
Hazards
LD50 LC50 Mixture:ORAL LD50 (LAB ANIMAL): 5 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, NAUSEA, &
UNCONSCIOUSNESS. SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:CARBON BLACK IS A SUSPECTED A2
CARCINOGEN BY ACGIH.
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, &
UNCONSCIOUSNESS. SKIN/EYES: IRRITATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION
IF NECESSARY. EYES: FLUSH W/WATER. SKIN: WASH W/SOAP & WATER.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:105F
Lower Limits:1%
Extinguishing Media:FOAM, CO2, & DRY CHEMICAL. WATER ISN'T A SUITABLE
EXTINGUISHING MEDIUM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES. ENSURE ADEQUATE
VENTILATION. ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIAL. USE
SPARK-PROOF SCOOP FOR LARGE SPILLS.
Handling
Handling and Storage Precautions:AVOID EXCESSIVE HEAT & OPEN IGNITION
SOURCES.
Exposure Controls
Respiratory Protection:IF >TLV, USE CARTRIDGE MASK.
Ventilation:PROVIDE SUFFICIENT VENTILATION TO KEEP
Eye Protection:GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING & BARRIER CREAM
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:326-387F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:DARK GRAY LIQUID.
Percent Volatiles by Volume:59%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT & OPEN IGNITION SOURCES
Hazardous Decomposition Products:CO & CO2
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL & FEDERAL
REGULATIONS FOR HAZARDOUS WASTE. COMBUSTIBLE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.